There are lots of routine affairs that make you often agitated and there are also too many solutions to make you calm down after a state of agitations and to enjoy a cold drink is the best solutions to overcome you anger! However, you can install an indoor bar to get relaxed anytime after getting overtired and due to over load of routine tasks and you can do it for free, is not it a big surprise?
Check this XL DIY pallet indoor bar, installed totally with disassembled single pallet lengths that have been packed in abundance to gain the require design and dimensions of this pallet bar! The project is similar to just a pallet wall paneling project but here you are to build a long bar with custom storage features by going in the same way! Need to get this project done precisely? Just try to use the precise wood cutting tools and also go with accurate measurements!

Plenty of separated apart wooden lengths, will be the very first to do this indoor bar project, it will not take longer to have wooden planks in abundance if you take a few pallet boards into pieces!

Build a primary sketch first and then install the pallets one by one to fill the whole primary frame for a big and thick solid wall to serve as a bar! Adding nails and to layer the glue, would be all you need to assemble the pallet slats!

By going in the same way one can also install kitchen counters and accent wooden walls with pallets! Paint this indoor bar built in XL size, with paint or finish it with stain and satin poly to avoid early weathering of it!
Made by: Terry Luke